Contact

Contact Merlin

Contact us

Pocket Projector Ultra Android

abdul sadiq posted this on Jun 25, 2015

Package Content

- ProjectorPad
- Power Adapter
- USB Adapter
- Quick Start Guide

 


Charging the Product
- Projector Ultra Android has a built-in 4000mAh Li-Polymer battery for mobile use. Please charge the device for at least 8 hours prior to its first use. Connect one end of the supplied power adapter to power jack and other end to a power outlet to start charging. Exchange the plug (EU, US, AUS) of the power adapter that accommodates the type of power outlet in your country if it is different.


Turn On/Off the Device
- Press the power button for 3 seconds to power on device. After booting, the lock screen will appear. Unlock the device by sliding your finger to the outer ring. Press power button for 1 second to turn the device to standby mode or press the power button for 2 seconds and the screen will display the power selection menu. Choose "Power Off" to fully shut down the device.


Turn ON the Projector
- When the device is powered on, press the Projector On/Off switch to turn on projector. Push the button again to deactivate the tablet display and just use the projection. A third press will turn off the projector and return to tablet screen.


Adjusting the Projector Focus
- Adjust the focus by rotating the focus wheel upward or downward to get a sharp and clear picture.


USB Device Connection
- The tablet can access and project the content from OTG USB device such as USB dongles or external hard disks. Connect one end of the USB adaptor to the micro-USB port of the unit and the other end to USB device


External Micro SD/SDHC card slot
- The device can read the following flash memory cards: Micro SD and Micro SDHC cards up to 64 GB. Gently insert the card into the Micro SD card slot by following the direction shown until it reaches the bottom of the slot. To remove the memory card, gently push the top edge of the card and pull it out.

 


Important Settings

Wi-Fi Connection Setting
- Tap Setting Icon>Wi-Fi to enable the Wi-Fi On, then tap the name of your network and enter a security password, if needed.

Languages and Input Setting
- Set your language input preferences by tapping Settings>Language & Input

Sign-in to or create a Google Account
- After having internet access, your tablet allows you to synchronize information with a Google Account. Tap Settings>Add Account to create or sign-in to an account, which will be used to synchronize your contact list, email, calendar and other information.

APPs
- Tap Menu in the right center of Home screen to enter the Apps screen. Here, you can find all installed Apps. After account signed in, you can download Apps from "Play Store" and install Apps online.

 


Product Specification

Tablet
Display: 7" (17.8cm) diagonal, IPS LCD, 1024x600 pixels, capacitive multi-touch
CPU: ARM Cortex-A9, 1.6 GHz Quad-Core CPU
Internal Memory: 16GB
RAM: 1GB, DDR3
Camera: Rear: 5.0 mega-pixels auto focus camera; Front: 2.0 mega-pixels camera
External Memory: Micro SD card slot up to 64GB
Speaker: Stereo
Connection: Micro USB (OTG), Wifi 802.11 b/g/n, Bluetooth v4.0, headphone, micro SD

Projector
Optical Technology: DLP, RGB LED
Resolution: 854x480 Pixel (WVGA)
Projection Image Size: 18"~120" (Diagonal)
Projection Distance: 20"~130"
Brightness: Up to 50 lumens

Product Details
Power Supply: Input: 100V~240VAC
Battery Type: Embedded, 3.7 V, 4000mAh, Li-Polymer rechargeable battery
Battery Lifetime: Tablet: ca. 8h; Projection: ca. 3h
Power Consumption: 6W
Dimension: 220mm x 119mm x 10mm (DxWxH)
Weight: 420g

Support