Contact Merlin

Contact us

iPhone 6 Case With Battery Pack

posted this on Mar 22, 2015


1) Remove the front frame of the case.

2) Slide your iPhone 6 in and place it over the Lightning pin.

3) Place the front frame back on the case and press until it clicks in place.

4) To charge your iPhone 6, press and hold the power button on the lower right side of the case for three seconds.

5) Four blue LEDs will indicate the amount of charge in the battery pack.

6) To charge the battery pack, connect the device to a 5V/1A adapter using the included micro-USB cable.

7) The case features a kick stand and a card wallet at the back.



1) Do not throw the device in fire as it may cause explosion.

2) Do not expose the device to direct sunlight or extreme temperature/humidity for a long time.

3) The device does not have any user-serviceable parts. Disassembling the device will void warranty.

4) Do not overcharge the device and avoid frequent full discharge.

5) The device may get warm. This is normal. However, to prevent overheating, keep the device ventilated and do not place anything on or around it.