You have no items in your shopping cart.

Subtotal: Call for Price

Bluetooth Nano Beat

More Views

Bluetooth Nano Beat

Be the first to review this product

Availability: In stock

$76.00
Reward Points You will earn 152 Points for purchasing this product.
The Merlin portable vibration speaker system takes the music from your Bluetooth enable devices and generates it into vibration sequences.
 

Details

Hybrid Speaker Technology – Includes a standard Vacuum speaker to deliver high to mid frequencies and Vibration Technology for the low end Bass frequencies.

 

Features NFC Technology Just Touch your NFC enabled Smartphone to the Merlin Bluetooth NanoBeat to pair.
Place it on any surface and turn that surface into a subwoofer!
Comes with a suction mount to place the device on glass windows and mirrors.

 

 

•Wireless Bluetooth Speaker with built in MIC - Play music and take your phone calls.


•Line-in port to connect to any standard MP3 player or Laptop PC


• 6 hours of entertainment.

Additional Information

In Depth Output Power: 10W RMS Frequency range: 40Hz - 20Hz Power Supply: Built-in lithium battery/USB Cable Impedance: Satellite 4ohms+subwoofer 2ohms Size: 55mm x 70mm
Dimensions 110 x 170 x 55 mm
Weight 273 g

Bluetooth Nano Beat FAQ

 


FAQs

a. Not turning ON?

   Make sure that the NANO Beat has enough charge to operate. Otherwise, fully charge the device.

b. No sound is coming out?

    Make sure that the connection is established properly via Bluetooth(within 10 meters) Or Aux cable.

    If you are using Mini SD Card, make sure that it’s working and the files inside are supported by the NANO Beat MP3 Player.

c. Sound Quality is not good?

   Check the audio files/aux cable being used. Otherwise send to Merlin Service Center for further tests.

d. Not charging?

   Check if the Cable, Source, and Power Port are working properly. Otherwise send to Service Center for technical examination.


 
Contents
 1. Introduction
2. Battery Precautions
3. Getting Started
4. Installation
5. Cable Connections 
6. Bluetooth Connection
 7. What the lights mean
8. After pair ,How to...
9. Battery Charging
10. Product Care
2 2 3 4 5 5 6 6 7 7
Please read the following safety warnings and precautions before using your device.

Specifications:

Merlin 10W Bluetooth
Output Power: 10W
Frequence range: 40Hz
• 20KHz Power supply:
Built-in lithium battery/USB cable Impedance:Satellite 4ohms+subwoofer 2ohms Size: 55mm x TOm
Weight: 273g
• Rechargeable battery with charging option from USB cable
• Operating range up to 10 meters
• Hands-free with mobile phone
• Bluetooth version 2.1+EDR ,CSR BC5
1. Introduction
Thank you for purchasing Merlin Audio System - a small portable music player, speaker and amplifier. You can turn any hard surface such as a wooden desk or glass table into a speaker by simply placing this device on its surface. This device can be easily connected with any audio or video devices, smartphones, etc. for your traveling or daily needs. The Music Player supports both bluetooth and line-in.
2. Battery Precautions
The device can be powered by a built-in rechargeable lithium battery.
Please charge the battery for at least 8 hours before your first use of the device.
• If the device is not used for a long period of time, the battery may lose its charge. Please recharge the battery.
• Rechargeable batteries are only to be charged under adult supervision. • Use only the supplied USB cable to recharge the battery. Improperly charging a battery may damage it or the device.
• Do not attempt to open the rechargeable battery or battery pack. There are no user serviceable parts inside.
• Should a battery leak, the device may become damaged. Clean the battery compartment immediately, avoiding contact with your skin.
• Keep batteries out of reach of small children. If swallowed, consult a physician immediately.
• Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged.
• Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Do not dispose as household waste.
3. Getting Started 
General Controls
media
1■1
p
LED
USB port 3
Volume Up Next Play/Pause
Microphone
Switch
Previous Volume Down
4. Installation Rubber Stand
Remove the protective tape at the bottom of the device to reveal the rubber stand. Noted:
1.Don't thrown away the protective tape, please stick it on when using a mounting socket or when not in use.
2.Use a wet finger to clean any dust off the pad.
5. Cable Connections
Power & Audio Input Combo Cable
for audio input from computer
111 ..0 WWI from cellphone R for audio input BA
6. Bluetooth Connection
• Slide the switch to "BT" , you will see a burst of flashes on the LED pairing it with your phone.
1. Put the Merlin in pairing mode When you turn on the bluetooth, the Nanobeat will be discovered by your phone. When the Merlin is in pairing mode the LED will flash in green.
2. Set your Bluetooth phone to "discover" the Merlin Follow your phone's instruction guide,first make sure that Bluetooth is activated on your mobile phone.Then set your phone to discover the Merlin.This usually involves going to"setup", "connect" or "Bluetooth" menu on your phone and selecting the option to "discover" or "add" a Bluetooth device.* 5
3. Your phone will find the Merlin Your phone will find the Merlin under name"Merlin". Your phone then asks if you want to pair with the speaker.
Accept by pressing "Yes"or "OK" on the phone and confirm with the passkey
or P1N=0000(4 zeros). Your phone will confirm when pairing is complete.
• In case of unsuccessful pairing, slide the switch to OFF then restart it to "BT"
7. What the Lights Mean?
What you see?
Slow green LED flash: Solid green LED light: Quick green LED flash:
What this means about your Merlin
In pairing mode-see Pairing section Connected to phone and in standby mode* Battery low
8.After Pair ,how to...
Play music from your phone 4 Adjusting sound volume Long Press +►I or -14e 4 Playing music from phone To start playback*, press ► II.
To pause playback*, press ► II . Press again to resume playback.
To skip to previous or next song, press - 144 or +
Make a call When you make a call from your mobile phone the call will (subject to phone settings ) automatically transter to your Merlin. 4 Answer/Reject /end a call press► II to answer a call, press ► II again to reject a call After calling, press again to end a call
9. Battery Charging
The device has a built-in rechargeable lithium battery. This can be charged by connecting to the USB port* of your computer. Refer to the battery indicator (The LED will change to red colour) for the charging status.
LED• quick green light flash LED 3 Stays at Red colour LED's Turn off
4 Needs changing Charging in progress
Charging completed
After charging, the device can be used without the power connection. Charge the device again when you see the battery indicator blinking quickly.
10. Product Care
Your device is designed to be light, compact and durable. However, it is an electronic device and must be treated carefully. Putting unnecessary pressure on it or striking the device against other objects can cause damage. To avoid damage to your device, please:
• Do not drop, crush, bend, or apply excessive force to the device.
• Do not expose your device to moisture, extreme or prolonged heat, cold, humidity, or other adverse conditions. Avoid storing it in damp, humid or wet places. It is not waterproof.
• Do not operate or store unit in places with frequent static electricity or electrical noise (e.g. speaker, TV set).
• Clean the unit with a soft cloth or a damp chamois leather. Never use solvents.
• The unit must only be opened by qualified personnel.
• This device contains magnets. Keep magnetic field sensitive products such as credit cards and video screens away from this device to avoid damage or malfunction.
 

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Support